Gary L. Berman,DMD., Sebastian R. Lombardi,DDS 720 Main St. Wilimantic, Ct  860-423-5518

Archive:

Posts for tag: bridge

ReplacingaBackToothMayHelpYouAvoidFutureDentalProblems

Considering the costs, many people view replacing a back tooth as less important than a more visible front tooth. They’re rarely seen, so who will notice?

You might, eventually. A missing back tooth can set off a chain reaction of problems that can affect your overall dental health. Besides playing an important role in chewing food, back teeth also redistribute most of the chewing force away from the front teeth. Their absence can also affect the bite: adjacent teeth to the missing one will tend to migrate toward the open space, causing them to tip and rotate into an improper position. This can cause an increase in tooth mobility, excessive wear and erosion, and endanger their survival in the long run.

To avoid these and other problems you should consider some form of replacement. Most dentists prefer a dental implant for its life-like appearance and durability, and because its titanium post has a natural affinity with bone. Bone cells will grow around and permanently adhere to the implant, which may stop and even reverse bone loss in some cases.

Implants, though, require a certain amount of bone structure initially to anchor and position properly. If you have inadequate bone and don’t want to bone graft the area, the next best option is a fixed bridge, in which the missing tooth is replaced with an artificial crown known as a pontic. The pontic is fused between two support crowns that are permanently affixed to the natural teeth on either side of the missing tooth (also known as abutments). While fixed bridges restore function and inhibit tooth migration, they require the natural tooth supporting the bridge to be reduced to accommodate the crowns placed on them. This permanently alters them and places them at higher risk for future nerve damage, gum disease and decay.

One final option is a removable partial denture (RPD). Although RPDs restore function and improve appearance, their movement within the mouth may place additional stress on the teeth that hold them in place. This movement over time could damage or loosen them.

We can discuss which option is best for you after a complete dental exam. The important thing, though, is to replace the back tooth as soon as possible — doing nothing could cost you much more in the long run.

If you would like more information on tooth replacement, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Replacing Back Teeth.”

By Gary L Berman, DMD, PC
March 24, 2015
Category: Dental Procedures
TeensMayNeedaTemporaryReplacementforMissingTeeth

Tooth replacement at any age is a challenge, but especially for teenagers. Dental implants in particular may not be possible yet for teens or young adults whose jaws are still developing. Because it’s imbedded directly into bone, the implant will not move with the jaw as jaw growth occurs, making it look potentially unattractive.

The best solution could be a temporary replacement until their jaw reaches maturity. One such option is a removable partial denture (RPD), an artificial tooth set in an acrylic base that resembles gum tissue. Although we associate dentures with older adults, an RPD works well for teens as a temporary measure. Perhaps the best version for a younger person utilizes metal clips that fit over adjacent teeth and hold the RPD in place. Although quite resilient, the wearer needs to be careful when biting into something hard (like an apple or similar firm fruit) or the artificial tooth may break off.

Another option, a bonded bridge, is a fixed solution similar to a traditional bridge. Whereas a traditional bridge is supported by crowns affixed to the teeth on either side of the empty socket (and requiring extensive alteration of the teeth to accommodate them), a bonded bridge attaches to the supporting teeth with wing-like projections of dental material that attaches to the backs of the adjacent teeth, hidden from view. Although not as secure as a traditional bridge, they can conceivably endure until the teen’s jaw structure is ready for an implant or other permanent solution.

Choosing between an RPD and a bonded bridge will depend on a number of factors, including the teen’s individual bite, clenching or biting habits and the health and strength of supporting bone and gums. Regardless of the type of solution chosen, it’s important to maintain good oral hygiene, especially around a bridge. If bacterial plaque is allowed to build up on tooth surfaces, it could result in an infection that can damage both gums and bone, and reduce the chances of a successful implant in the future.

All these and other considerations should be discussed after a thorough examination. From there, we can advise you on the best course of action to restore both appearance and function until it’s time for a permanent restoration.

If you would like more information on temporary tooth replacements for teens, please contact us or schedule an appointment for a consultation.

By Gary L Berman, DMD, PC
August 01, 2014
Category: Dental Procedures
Tags: bridge  
MarthaStewartShowsOffRenovationWork-InHerMouth

Martha Stewart has built a flourishing career by showcasing the things she’s designed and made — like floral arrangements, crafts, and even home renovations. Just recently, she was showing off her latest restoration project: a new dental bridge. In fact, she live-tweeted the procedure from her dentist’s office… and she even included pictures of the bridgework before it was placed on her teeth!

OK, it’s a departure from paper crafts and home-made pillows… but why not? We can’t help feeling that there’s just as much craftsmanship — even artistry — in dental bridgework as there is in many other custom-made items. If you learn a little more about what goes into making and placing bridgework, perhaps you’ll understand why we feel that way.

Bridgework is one good solution to the problem of missing teeth (another is dental implants). A fixed bridge is anchored to existing teeth on either side of the gap left by missing teeth, and it uses those healthy teeth to support one or more lifelike replacement teeth. How does it work?

Fabricated as a single unit, the bridge consists of one or more crowns (caps) on either end that will be bonded or cemented to the existing teeth, plus a number of prosthetic teeth in the middle. The solid attachment of the crowns to the healthy teeth keeps the bridge in place; they support the artificial teeth in between, and let them function properly in the bite.

Here’s where some of the artistry comes in: Every piece of bridgework is custom-made for each individual patient. It matches not only their dental anatomy, but also the shape and shade of their natural teeth. Most bridges are made in dental laboratories from models of an individual’s teeth — but some dental offices have their own mini-labs, capable of fabricating quality bridgework quickly and accurately. No matter where they are made, lifelike and perfect-fitting bridges reflect the craftsmanship of skilled lab technicians using high-tech equipment.

Once it is made, bridgework must be properly placed on your teeth. That’s another job that requires a combination of art and science — and it’s one we’re experts at. From creating accurate models of your mouth to making sure the new bridge works well with your bite, we take pride in the work we do… and it shows in your smile.

If you would like more information about dental bridges, please contact us or schedule an appointment for a consultation. You can learn more by reading the Dear Doctor magazine articles “Fixed vs. Removable Bridges” and “Dental Implants vs. Bridgework.”